Gutter Guards Installation

Waterfall Gutter Guard

Homes with water leakage from the roof may need an effective gutter system to direct the water on the downspout. Gutters usually gather debris that is blown around like falling leaves and when they accumulate, it can be a hassle to clear this debris out. If you want to be free from this kind of problem, you can set up a waterfall gutter guard. It is not difficult to set up and it will keep the debris away from the gutters while the water flows the way it should.

Here are some important steps on how to install Waterfall Gutter Guard:

1. This gutter system is to be used on 5 inch round and 6 inch K-Style gutters and 4 inch and 5 inch K-Style. The first two on the list needs an adapter clips for safe attachments. For proper installation, you must find the guidelines and then follow them correctly.

2. Use either a saw for setting up. Clear out any debris and dirt in the gutters then measure the waterfall gutter. For every 20 ft., it should be not be more than a 1/4 inch to 1/5 inch slope. From the drip edge, it should be placed in between 1/2 inch to 1 and 1/4 inch, so that it will not stretch out more than 1 inch.

3. Start the installation of the water guard at one end of the waterfall gutter. Move the top edge of the guarding under the roof shingles’ fist row. If there are roof nails in the shingles’ row, move the guarding underneath the second row. You have to make sure that the entire edge is under the shingles. Then pull the front edge of system down with the hammer’s claw and put it into place where it meets the gutter’s front edge.

4. Pull the waterfall system forward in a straight direction along with the channel that secures the whole guarding section. If it is hard to fit, bend the edge of the system over the edge of the gutter.  Take 1-inch space between the gutter’s and guarding system’s end to allow contraction and expansion when the temperature changes.

Use the same procedure for the next linear section taking a space of 1/2 inch between the two. Repeat this procedure until the whole gutter has been covered with the system of Waterfall Gutter.